TinyLily Mini Processor Board – TinyCircuits
- Arduino and LilyPad Compatible
- Atmel Atmega328P processor (same as is used on the Arduino Uno and LilyPad)
- Washable
- Sewtabs for 8 I/O (4 Digital, 4 Analog / Digital) and 4 Power Sewtabs (2 for power, 2 for ground)
Note: To program this board, you need to use the TinyLily Mini USB Board, which is sold separately.
TECHNICAL DETAILS
- Arduino and LilyPad Compatible
- Washable
- Robust Gold Finish – makes soldering easy and is non-corrosive
- Sewtabs for 8 I/O (4 Digital, 4 Analog / Digital) and 4 Power Sewtabs (2 for power, 2 for ground)
- Sewtabs are 1.2mm in diameter, easy to use with standard conductive thread and needles
- Arduino Bootloader preprogrammed (uses approx 0.5 KBytes of Flash Memory)
- USB expansion header (for use with the TinyLily Mini USB Board)
- Ultra compact size and weight (smaller than a US Dime!)
- 14.0mm (0.55 inch) diameter
- Max Height: 2.8mm (0.11 inches)
- Ultra-thin 0.61mm (0.024 inches) PCB
- Weight: .39 grams (.01 ounces)
- Atmel ATmega328P Microcontroller
- 32KB Flash, 2KB RAM, 1KB EEPROM
- 1.2mA (typical) @ 3V, 4MHz
- Clock speed: 8MHz
- 2.7V – 5.5V operating voltage
NOTES
- If you are brand new to the TinyLily, buying a kit is the best way to go since it will have all the parts needed. Check out the kits here.
- This board does not include a voltage regulator – do not supply more than +5.5V or you will permanently damage the board and ruin your day.
DOWNLOADS
- ATmega328p Processor Datasheet
- Schematic
- Eagle Files