1/2″ Flow Meter – Atlas Scientific
• 1/2″ Female NPT Flow Meter – 5.7 L / min to 75.70 L / min
• 1 Flow Connector Board (soldering required)
• Food Safe
• Gasoline Safe
• Diesel Safe
• Kerosene Safe
• Accurate to ± 5%
• Material: Polypropylene
• 1/2” Female NPT Input/Output
• Minimum flow rate 5.7 L / min (1.5 GPM)
• Maximum flow rate 75.70 L / min (20 GPM)
• Weighs 104.3g
• Operating temperature -29º C to 82º C (-20º F to 180º F)
• Max operating pressure 689 KPA (100 PSI)
• Max viscosity 200 SSU
• 71.1cm (28”) long 3 lead cable
• Dimensions 77.5mm X 58.5mm (3.03″ X 2.30″)
• Reads flow rate per second, minute, hour and total flow.
• Works with any off the shelf pulsed DC flow meter regardless
of manufacture
• Works with any DC pulse per volume flow meter
• Works with any DC pulse frequency to volume flow meter
• Programmable with up to 16 integer or floating point K factors
• On the fly linear interpretation between K factors
for maximum accuracy
• Visual display indicating real-time turbine rotation
• 1K, 10k or 100k on-board pull-up or pull-down resistors
(for flow meters that require external pull-up or pull-down)
• Comes pre-programmed with 4 different Atlas Scientific
flow meters
• Data format is ASCII
Data protocol
• UART asynchronous serial connectivity
• (RX/TX voltage swing 0-VCC)
• Operating voltage: 3.3V to 5
Sleep mode power consumption
• 2.1mA at 3.3V
Downloads
- 1/2″ Flow Meter Datasheet
- Wiring Diagram
- Arduino Sample Code
- Arduino Mega Sample Code
- Raspberry Pi Sample Code
- 1/2″ Flow Meter 3D model (*step)