4 Ports RS485 Ethernet Modbus Gateway USR-N540-MQTT
USR-N540 is 4 serial Ports Secure Serial Device Server which can connect RS485 serial devices to the TCP/IP network. It supports bi-directional communication.
● Independent 4 RS485 ports. (3-in-1 Serial port RS232/RS485/RS422 Optional)
● 5-36V wide voltage input.
● Modbus RTU to Modbus TCP, Modbus Polling, Modbus to JSON
● Flow control XON/XOFF
● Secure Client Operation Mode: TCPS, HTTPS. MQTTS
● SSL/TLS Encryption
● Modbus RTU Master, Edge computing
● Hardware watchdog, automatically restarts when the device goes down.
System Information | |
Processor | ST Cortex-M7 |
Basic Frequency | 400MHz |
Flash | 128K+4M byte |
Ethernet | |
Port Number | 1 |
Interface Standard | 8 pin RJ45 |
Rate | 10/100 Mbps, MDI/MDIX, auto switch between cross and direct connection |
Protection | 2KV electromagnetism isolation, shell insulation blocking |
Network Protocol | IP,TCP,UDP,DHCP,DNS,https,ARP,ICMP,Web socket,httpsd client |
Receive Buffer | Max 16k bytes buffer |
Serial | |
Port Number | 4 RS485 Ports, can work at the same time) |
Interface Standard | RS-485: 2 wire (A+,B-) half-duplex |
Data Bits | 7,8 |
Stop Bit | 1,2 |
Parity Bit | Even,Odd |
Baud Rate | 600bps ~ 921600 bps |
Flow Control | XON XOFF |
Buffer | Send and receive 2k bytes respectively |
Protection | RS-485: anti-static 2KV,lightning protection |
RS-485 Pull-up and Pull-Down Resistor | 2.2 KΩ |
Software | |
Virtual Serial(USR-VCOM) | Windows 2000 or higher(32 bit/64 bit) |
Configuration | Built-in webpage, computer set-up software, serial command |
Basic Parameter | |
Size | 222 x 122 x 29 mm (including shell and terminals) |
Operating Temp. | -40 ~ 85°C (industry) |
Storage Temp. | -40 ~ 85°C, 5 ~ 95% RH (no condensation) |
Input Voltage | DC 9 ~ 36V |
Working Current | 53mA @ 12V |
Power | <1W |
Utilities
[Setup Software] H7 Version
Documents
[Datasheet] USR-N540-H7-4 Datasheet
[AT Command Manual]ARM Cortex-M7 Series AT command manual V1.0.0