Ultrafast Speed USB 3.0 to WiFi6 Dual Band
UAX180 Brings You
Various Network
Experience
STA Mode: Enable the desktop to connect the WiFi6 network easily.
SOFT-AP Mode: One WiFi network adapter turns your computer
into a WiFi6 router easily.
Driver Pre-loaded
Plug and Play
Compatible with Win10 & Win 11
Gigabit Dual
Band SuperSpeed
Note:Passing through multiple walls,2.4G WiFi is recommended,
while for no walls or only one wall,5.8G WiFi is recommended.
OFDMA & MU-MIMO
OFDMA and MU-MIMO technologies ensure a fast and
efficient Wi-Fi connection.
OFDMA enables more clients to connect to access points.
MU-MIMO allows multiple users access the wireless network
simultaneously including downlink and transmissions.
USB 3.0 Fast
and Stable
External Dual
Antenna. Range
Boosted.
High-gain enhanced antennas make signal
reception more sensitive.
Avant-garde
Design
WPA3™
for Enhanced
Network Security
The latest WPA3™ Wi-Fi encryption providing more protection for
your network and connected devices.
Power supply |
|
Input Voltage |
9 – 36 VDC, reverse polarity protection, surge protection |
Power Consumption |
Idle: < 2.4W, Max: <4.8W |
Serial port |
|
No. |
2 RS485 serial port, the first one can also be RS232 RS232Terminal block connector: TX, RX RS485Terminal block connector:A,B |
Baud rates |
600~230400bps |
Data bits |
7,8 |
Stop bits |
1,2 |
Parity |
None, Even, Odd, Mark, Space |
Flow |
None,XON/XOFF |
Physical interface |
|
DI |
2 x Digital non-isolated input (0 -2 V detected as logic low,9 -36 V detected as logic high) |
DO |
2 x Relays DC contacts rating @R(at resistive load)10A / 28V DC AC contacts rating @R(at resistive load)10A / 277V AC,NO AC contacts rating @R(at resistive load)5A /250V AC, NC |
AI |
2 x Analog input 4-20mA |
Physical spec |
|
Dimensions (W x H x D) |
79.6x 58 x110 (mm) |
Mounting options |
DIN rail,wall mounting |
Hardware protection |
|
ESD |
IEC61000-4-2,Level 3,class B,contact6KV,air8KV |
Surge |
IEC61000-4-5,Level 3,class B |
EFT |
IEC61000-4-4,Level 3,class B |
Status LEDS |
|
Power |
ON:Gateway is powered up OFF: Gateway is not power up |
Work |
When the device is working properly, it blinks for 1s frequency |
NET |
Blinking when the wan connects to internet OFF when there is no work |
DATA |
Blinking when serial port is transmitting data |
DO |
Light on, the channel output is activated |
DI |
Light on, the channel is activated by input signal |
Network |
|
ETHERNET |
1 x WAN port 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX |
Software |
|
Network protocols |
ICMP,IPv4,IPv4,ARP,ICMP,TCP,UDP,DHCP,DNS,HTTPS,MQTT,SNMP,Telnet,NTP,SSL v3 |
IP |
DHCP/StaticIP |
Websocket |
Supported |
MQTT |
Supported, standard MQTT protocol, 16 subscription topics and 16 publish topics |
Linkage control |
Supported. Data collection points, DI, and AI can be used as trigger and executed by DO |
IOT PLATFORMS |
Alibaba cloud, AWS IOT ,PUSR cloud |
User Configuring |
Windows Utility, web console(HTTP) |
Operating environment |
|
Operating temperature |
-40 °C to 75 °C |
Operating humidity |
10% to 90% non-condensing |
Ingress Protection Rating |
IP30 |
MODBUS RTU master |
|
Supported functions |
01, 02, 03, 04 |
Supported data formats |
8 bit: INT, UINT; 16 bit: INT, UINT (MSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB);64bit:float |
Supported data points |
128 |
APPROVALS |
|
Regulatory |
CE/RED,RoHS |